ski6

I live in Tampa and there is nothing too close. Mccormicks as mentioned above is closed at at the moment however they are in the process of re-opening the water ski side too (not just the cable). I think they just got their ski boat. Other that, Kyle Eade(Fluid) in Polk City is approx. ~45 minutes way or Ski Paradise in Mulberry (need your own boat)(also about 45 minutes)

Price drop to $750. PM if you are interested.

I stay in Tampa too and I am looking too! Time to find a lake and start a club it seems if we can get enough people together.

Does anyone have any updated info or new suggestions? I just moved to Tampa so looking for places to ski. I know of Mccormicks in Seffner or else between Fluid and Ski Paradise however these are ~1hr drive.

Just dropped the price to $950 if anyone is interested. Also not sure why I wrote 5 sets ridden in the above! Probably close to 10 but it's pretty much a brand new ski!

Sold!

Brand New HO Pro 2022 - Used for 5 sets only. Perfect condition. 66" Collect in Tampa or ship to you

No longer need this so I'm selling my ZeroOff programming kit. Used once works as new. All you need is the free Aquastar display software loaded on a laptop along with the latest update file purchased from ZeroOff. Kit sells for $300, selling for $225. PM me if interested or if you have any questions,

Did Nautique ever cover these under warranty out of interest?

We had the same issues. Our passenger side also cracked externally first at about 600 hours and then on drivers side at about 800 hours ait cracked internally We landed up with water in the engine which is obviously not good. We blew the cylinder head. We had our drivers side one, cut open so they could weld internally and it seems to have lasted about 4 months thus far. There is no stock of these parts either. Here is the video of it showing it leaking internally. See video here

I have also tried multiple times recently to contact zero off via phone and email with no response. I would like to upgrade to my 2013 SN 200 5.7L from dual puck to single puck. Does anyone have any contacts at Zero off or someone who can help for a Nautique?

@otcjb - I used the GoPro Media Mod which allow you to output via HDMI to any HD Transmitter and charge at the same time. I was using a normal SD Transmitter so I converted the signal from the GoPro HDMI output to normal AV(RCA) using a box converter to convert the signal. A bit messy. Also, I powered the camera from a power bank as with the boat turning on and off, this was causing a few problems with the camera to freeze. Afterwards, someone mentioned to me to leave the battery out of the camera, but I never tried as yet.

Check your spark plugs. We had an issue where the boat would appear fine but had no top end Or power and it turned out to be the spark plugs

So today, I put my used set of spark plugs back and the boat ran perfectly fine from the start. However I did get this error message while idling

Hey Ballers, Wondering if anyone has had experienced anything like this before? We are having a problem where the boat can’t do 58km/h(36mph) for the first few passes of a set. (The times are slow like 16.85 when the boat is meant to be doing 36mph). After 3rd pass, the boat usually comes right and the times are fine again. I initially thought it was zero off/puck related but even with the Zero-off, off, the boat is not performing correctly. On the weekend, we did some tests with the zero off, off and no skier. The first pass the boat wouldn’t go past 36mph with the speed control off. You can even feel, the boat is slow/sluggish on the pull off. The second pass the boat was surging however the speed eventually came right towards the end of the second pass with a normal maximum speed of about 65/66km/h. I have uploaded the videos to dropbox to help show this crazy scenario. - click here You will hear the boat surging. Today, the 1st pass, the boat would only go about 53km/h at full speed(32 mph) at first so the problem seems be getting worse. There is also a lot of white smoke. I have also tried running it with the engine box open. However soon as the boat is switched off, and starts again the same issues come back. Once the boat starts running again and after pass 3, everything is perfect and the boat runs perfectly. Very strange I know. We also always ensure the boat is up to temperature prior to running it. During the tests, the temperate as seen from the video is normal. Boat model: 2013 SN 200, 5.7 litre with 800 hours used only in Fresh Water To date we have tried as follows; • Replacing O2 Sensors • Drained and cleaned fuel tank • Changed all the fuel filters • Changed distributor cap and rotor • Changed spark plugs - Performed compression test. All was in order • New manifold(the one was cracked slightly - redone normal service items - oil, impeller and belt change I have also run the diacom. No error codes to date. Cam retard is at 15 degrees Thank you in advance