skialex

You would need to use a material that withstand the pressure and most importantly the sun heat. Definitely don’t use PLA or PETg. They might coop with the pressure if not over tightened, but heat… they won’t cut it…

Tilt the ski to the left a little if you are LFF and Vice versa. Rope should still be touching the side of the ski when getting out of the water. When you get used to the hard shell you would not need to do that, that much anyway.

@wettek69 honestly couldn’t though of that… maybe you have to go the diy route, cut the horseshoe in two pieces to widen it, find a source for a rubber sheet and use the standard one as template but make it wider, or split the standard rubber and reconnect it with maybe a leather piece to make it wider. I guess the standard heel squeeze piece can be used as is. Modifying it can really hard.

If you are talking combo skis.. bindings come in two pieces each. All you have to do is to spread them apart. By how much, I’m not sure, use foot as template. Somewhere between the original screw holes, there is definitely enough space to drill some new and use the old ones for guide and measurement purpose.

I had so many sets for March, that I feel I’m done… taking the rest of the month off…. Or… not…🤗

Give the guy some slack… do not discourage newcomers, ok this was too much, but still, suggest him to follow the threads, learn the rules of the forum and encourage him to be a part a great community.

@Deanoski I liked what you wrote and yes reflex need forward pressure to eliminate play and risk of prerelease and also testing outside is important and the concerns about the ss springs. But in the HO system the shell stays put because of the base that it sits in and can stay in place with less forward pressure and still work fine. It is just a little more difficult to adjust it when it develops more play than it should.

@cacman M8

Florida or bust! 6 hours to take off…!

Skied that week and bought new ski after that. Sportube… I’m still using the same one.

Last summer, on the way to SanGervasio. Ski tip was damaged, I took pictures at the airport and left so I would not miss my ski set. Send a Mail to the airline explaining everything, with photos, an invoice for the tube and a link to the manufacturer’s site of the ski and its cost. I’ve got a reimbursement that covered the ski and tube. repaired both…

@Horton Nailed it….

@whitem71mine doesn’t work either and I don’t upgrade if not needed. the message is that it has been removed from the AppStore. for me that I set up skis for a lot of people’s skis and older models, was very useful. i hope it will come back. Any advice on how to make it work again, if it’s on my end is vey welcome.

Skiing this… getting in ski shape for Florida trip next week!

@Horton Kyma means wave in Greek, unless It’s an acronym… they named their boat “Wave” just sayin…