Jump to content

Andre

Baller
 View Profile  See their activity

  • Posts

    2,179

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by Andre

  1. Andre
    Not funny Horton.Your turn will come...if you get to 50! Want to hear the Miss Hawaian Tropic story again!
  2. Andre
    Camaro full lenght. Warm and comfy...
  3. Andre
    Like it or not,it's the future.
  4. Andre
    You guys all know that if you'd be garanty one bouy more on average you would all be in line (right behind me) to buy one ? :wink:
  5. Andre
    @vtjc You know it,deep down,you were always a MC guy... :wink: Nice boat!
  6. Andre
    Someone should make some fin out of carbon...lots of money to be made!
  7. Andre
    @UWSkier Very true! How long does a completed 34mph pass takes from getting up to stopping at the other end on a 2000' lake? Around 32-34 seconds? So 1 hr of use when full charge=100 completed passes. Elecricity is cheap and almost 98% green here...
  8. Andre
    http://www.ltsmarine.com/EN/ First Nautique ever converted was by LTS marine.
  9. Andre
    Jet boats. No throttle no control!
  10. Andre
    That's also a lot of scew holes in the ski...
  11. Andre
    Beautiful site!
  12. Andre
    Wasn't a beam,just a bigger then usual boat anchor and my boat is a 94...but we did use a johnboat.Ski boat for thightening with someone holding a looped rope around the anchor,slowly bumping the boat forward then final tightening from the 2'' ratchet strap.Someone less cheap then me could use a SS strap.
  13. Andre
    No we use regulars but for us the course never move and once tight it will stay that way.So far we replace the original in 2014 and the relacement is still in use.Won't work for someone who must adjust tension frequently but for us we just hook balls and ski.The replacement must be all rusty by now and wouldn't move probably.We use it only on one end.Course must be already close to tight as you can't take 6' of loose with the ratchet strap.We pulled the anchors pretty tight first then tighten the strap.
  14. Andre
    We fabricated 2 Danforth style anchors of about 100 lbs each out of scrap steel.Same mucky bottom and depth.They never moved an inch.We dropped them with some tension in the course but do the final tightening with a 2'' wide ratchet strap. Install since 2009,permanent set up,SS mainline from ED and dropped to the bottom every winter.Great product.We had to recrimp in 2014 but other then that no problems.
  15. Andre
    @Broussard Funny ,just looked at that link after posting and thought that it should be incomplete. Is that all there is to the 86 graphics? And for more stuff on older MC,link to it is https://www.dropbox.com/sh/o91j4vsfromgu2x/AAALkRQmKatN3_1U8Z_o9iZHa
  16. Andre
    X 1000 times what Bracemaker gave you. MC TeamTalk is THE only place to go for those graphics. Mike is a 200% MC guy.One of the true ones. He will get you the right ones.
  17. Andre
    More cliks more money for...
  18. Andre
    Well said @A_B !
  19. Andre
    @skialex Yep.The guy that stoled it first! :) Merry Christmas!
  20. Andre
    Congrats! Awsome feeling isn't it? 15 years ago i introduce a friend to the course. He thought he would be running it before the summer's end. Took him 3 full seasons!
  21. Andre
    Coolest BOS thread! These days anyway.
  22. Andre
    @Stevie Boy Noir desir. French group Le vent nous porteras...
  23. Andre
    Looks like a lot of fun! I must have miss the ''freeze'' part... :)
  24. Andre
    Plants? Only good when smoke! ;)
  25. Andre
    Funny.Mastercraft used to be the one that was putting a cherry on their MCX rated at 350HP. I also doubt the 550 lbs torque quoted 2 post up...and i'm a MC guy! :)
×
×
  • Create New...