Personnally,after missing out on 2 200 6 liters CB last fall,i've decided to keep my 2k hours 94.New vinyls and carpet this year and engine rebuilt next. At 60 y.o. decided to keep my money for retirement. Taking June,July and August off work!
That's a lot of missing gelcoat for a 390 hrs boat but easily fix.Hope the rest has been well maintained! You've seen Ottawa ski club 200 for sale ? It has the 5.7 wich is a no for me but maybe ok with you...
\\\ Me in 93 when MC came up with the LT-1 Corvette 310 hp engine and the Powerslot transmission.
''Who really needs more then 300 hp in a ski boat ?''
Guess i was wrong!
I also removed the combing pads definitively and fabricated some aluminum ski racks.Pix of the racks but be aware that the boat was really dirty under the combing pads and it's still too cold here to do fiberglass and gelcoat works to patch holes of the studs that were holding pads to the fiberglass. The 94 Prostar is a small boat compare to today's standards and clearing the floor of the skis when we're 3-4 skiers will help.
Here's some live pics of the racks. Bended manually some 1/4 × 2" flat bar for the main part and the holders are 1/8 flat bar. Front top part will be bolt trough where you see the stud andbottom will be SS screws where the pads were screws. Back part will be in the floor screws only. It's tight in there for 2 skis and you have to be careful how you place your ski...but it fits! Had to get the old Nomad RC for testing purpose.
Aaaah,thanks! She told me the old one was tacked.Gonna have to be creative here i think.
Combing pad before and will finish the rough fiberglass edge with the rubber U edge trim.
I'm having the boat vinyls change by a good and experience lady but she's having problems tacking the vinyls in 30 years old fiberglass.Old skins were also tacked in but not sure how much fiberglass was cured when they were doing it at the factory Anyone with tricks or experience on that ?
Thanks for any help! Pix of before and part of the passenger seat and driver seat that i got yesterday.
🥺 Don't understand.
I'm using ''soft'' MSN gloves now and still, the rubber will go way before the rope on all the handles that i have ever use...even when i was using ML kevlar gloves.