Jump to content

countymountie

Members
 View Profile  See their activity

  • Posts

    109

  • Joined

  • Last visited

 Content Type 

Everything posted by countymountie

  1. countymountie
    Thanks for all the suggestions. I knew I had to strengthen my core, but I would have never thought that crunches would be bad for my back. I will be buying one of the support belts that was suggested in addition to working on my core.
  2. countymountie
    I spent two months off this summer living in my recliner after I threw out my back after skiing and am a little apprehensive about skiing again. On my third set, I felt pain in my lower back getting pulled out. After an MRI, I have a slight L3 bulging disc. I couldn't even walk I was in crazy pain. After 2 months and 2 steroid injections I'm feeling better. Would switching from 2 feet in to 1 foot starts help lower the stress on my back? Neoprene weight lifting belt? I thought I saw an men's open skier wear one. Would a Goode Power Vest help or would it just help reduce the load on the arms? Opinions??
  3. countymountie
    When I changed out my impeller, it was just a lot easier to pull out the whole pump assembly and change it out on the workbench.
  4. countymountie
    The beam is 95". Are you talking about the bunks that are underneath the boat? I just measured mine out so they are close to the bunks on my trailer.
  5. countymountie
    Finding a torque wrench that had the low torque setting was the hardest part, but it's also very helpful for snugging up the engines knock sensors when you put them back in during the winterization process. I think I bought mine at Harbor Freight. Cheap.
  6. countymountie
    I have found the vice to be the best glove for me. I've had the Clinchers, ML and they don't compare to the Radar. I will be needing to replace a model from 2 years ago and have heard the newer ones are better; however, they run smaller. I guess that gives me a reason to go visit and support my friends / local dealer. Currently I wear a medium with a .94 ML curved setup.
  7. countymountie
    I like the ski art, but for that price I could get a Radar tent...uhh I mean Radar TUBE, yeah tube. Haha , j/k @Horton. :p
  8. countymountie
    I need a hoodie in Michigan..........or a BOS parka.
  9. countymountie
    "cold" is relative. Try living in Michigan. My friend in Ohio have two more month of skiing a year than I do. You could live in FLA and have to put up with the stank humidity in the summer. Or Kalifornia and live with the socialist state gov.
  10. countymountie
    I bought a Camaro shortie and full suit from Robby. Awesome service, awesome product. Michigan has only seen a handful of days over 82. I will getting a impact vest whenever they get in stock. Hopefully soon.
  11. countymountie
    I'm looking at getting one. @Horton I noticed that you got one from Masterline but I haven't seen the review.
  12. countymountie
    My next purchase to go with the shortie. It's hard to focus on skiing when my drysuit is chocking me to death. For the price of getting a larger neck seal, I can get a Camaro.
  13. countymountie
    Would putting shims under the bunks be a viable alternative? My 200 sits very low on my Phoenix trailer forcing me to put the trailer in deep. You can see a gouge that was left on cross beam in front of the roller by the keel.
  14. countymountie
    After being told many time, "get your hips up" , "stop skiing off your back foot" and not improving, I am going to focus on keeping my back heel down, back leg straight. My Radar sequence plate (first generation) is all bent up from me subconsciously lifting up my back heel. After moving back to a RTP I noted how much I was lifting it.
  15. countymountie
    I bought my firkin years ago. It's the cat's meow. People ask me all the time where they can get one.
  16. countymountie
    It is a base model that has very few of the expensive options.
  17. countymountie
    I'm running 30.75 with a RTP on my 68" Vapor and haven't found any negative issues such as excessive turn in or lack of stability. I need to work on getting into a stacked position and getting my COM forward. Would straightening / locking my back leg help? On dry land it seems to force me to put more weight on my front foot and be more upright.
  18. countymountie
    I would be the first in line to buy a handle from her if she made one that has the curved ends. I had an in-tow rope that I liked a lot until I left it at Jack's. All of my Masterline gear works well: however $170 for a handle??? Seriously??? I would put in for an order with US Gear for theirs but have read of multiple skiers that have paid and haven't received a handle.
  19. countymountie
    @skiray‌ Did you put a torque wrench on those knock sensors and tighten them to tolerance? I think that would have put you over the time limit.
  20. countymountie
    How thick is the plate that attaches to the boot? The issue that I see is the front boot is going to be significantly higher on the ski than a RTP that is attached directly to the ski without some sort of shim under it.
  21. countymountie
    @HPskier1‌ I'm kind of in the same situation. I will be in Orlando next week and thought about taking the ski. The problem is due to living in Michigan I haven't skied since September and probably won't ski again until April. I have taken lessons in Florida from a number of great instructors; however, expecting to be able to learn after a long layoff and then being able to apply what was learned 3 months latter is NOT going to happen.
  22. countymountie
    Currently using ML .94 radius with a knotless ML. I loved the knotless intow until I left that at Jack's last year. It felt "lighter" than my ML. I was using a Radar extended with a triangle grip with my Radar Vices and had TONS of grip! Maybe it was skiing 4 sets a day at Coble's but my elbows hurt like hell. That's when I switched back to the ML.
  23. countymountie
    Last month my check engine light came on consistently at 3k rpm. I took it in to the dealer and got hosed for $240 in labor to change out a $28 knock sensor. Needless to say, that will be the last time they see my boat.
  24. countymountie
    @Ed_Obermeier‌ where did u find those numbers? I was setting up my 68 at Cobles last night and all we found on Radars and perfski was 30.25? A quicker hookup would work. I have yet to put too much tip pressure on this ski.
  25. countymountie
    @Ed_Obermeier‌ Thanks for the info EZ. I think I'll try 30 5/16 for my first set. Let me know how your new settings work. That is a big move from the suggested factory numbers.
×
×
  • Create New...