Short deep settings on D3 NRG R2

[Dano]

I got curious about running short deep on D3 NRG R2.  I've been using factory rec for over a year 6.93, 2.455, .745.  It's pretty good, but I've never really liked the line this setup seems to draw (narrower in straighter to buoy) and i was hoping to find a little better onside.  It tried short deep mostly just out of curiosity.  6.87, 2.48, .73.   I really liked the line this set up draws headed out to buoy.  I don't have video but when skiing it feels good into and thru the wakes and sets me up on a good line with time and space, but  but it feels like the ski is  out in front of me more than is ideal and riding deep.  It feels a little more on a rail than the long shallow but with rather abrupt turns on both sides.    I'm not much of a fin tuner so I'm wondering what move would you try to maintain the time and space but bring back the predictable turns.

I'm skiing -32@34

[MillerTime38]

I used these settings last year when riding the R2. Have you messed around with boot placement

6.912

2.515

.765

[Dano]

@MillerTime38 ya I’m using radar valor size 12 .  I’m 291/4 to the bottom stitch.  Factory is 29.5.

[S1Pitts]

Hey @Dano

This was best on my R2 for short deep 

2.520,  6.785,  0.815,  7deg

I had to run the boots 1/4 inch ahead from LS position. Fast turns

[Deanoski]

I would move the Fin forward 05 at a time to find your sweet spot 

[Dano]

@MillerTime38 where was your boot with your setup?  

[Dano]

@S1Pitts was that stock fin?  I know you had CG in it for a while 

[MillerTime38]

@Dano I was stock at 29 1/2.
i run a RTP and I moved it back a little further 1/8” and it made the ski feel way better. 

[skibrain]

@MillerTime38 what length ski? 

[S1Pitts]

@Dano Tried both fins at same settings. Remarkably could not feel much difference between them

[MillerTime38]

@skibrain 66”