Guest Posted August 9, 2022 Share Posted August 9, 2022 I have an old mastercraft pro star 190 year 2000 And I really want to convert it to zero off. Can this be done with out a new engine? Looking for advice. Link to comment Share on other sites More sharing options...
Administrators Horton Posted August 9, 2022 Administrators Share Posted August 9, 2022 you will need a new engine. @Jody_Seal can give you the particulars Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Baller Andre Posted August 9, 2022 Baller Share Posted August 9, 2022 Buy another boat. 2000 is not even the Evo hull 2001-2013. It's the infamous 98-99-00 generation!? My ski finish in 16.95 but my ass is out of tolerance! Link to comment Share on other sites More sharing options...
Baller_ Mastercrafter Posted August 9, 2022 Baller_ Share Posted August 9, 2022 You’d need a new engine. Having installed a ZO Ilmor MV8 in a 1991 Prostar, in hindsight, the better route would be to use a PCM ZR409 without cats for packaging, plus you don't need an $800 throttle and $900 fuel pump with the PCM. No offense, but I wouldn't spend the money converting that boat. Link to comment Share on other sites More sharing options...
Baller_ swbca Posted August 9, 2022 Baller_ Share Posted August 9, 2022 @Andre My son has had a 1999 197 for about 15 years. What is the nature of it's liabilities compared to the evo generation ? His motor cover upholstery is still like new, much better than my 2004 . . but that of course could be due to being on a trailer and covered most of time. I am not questioning your comment, just curious about the nature of its reputation ? Link to comment Share on other sites More sharing options...
Baller Andre Posted August 9, 2022 Baller Share Posted August 9, 2022 @swbca Lol! Just an old story of ear-said that the 98 Prostar hull had tracking problem at the AWSA test and according to different stories ended up on shore after chin locking. Just stories though...the 98-00 Prostar always had a black eye reputation after. But for opening poster,listen to Mastercrafter,he knows his shit about conversions and their values. My ski finish in 16.95 but my ass is out of tolerance! Link to comment Share on other sites More sharing options...
Baller BraceMaker Posted August 9, 2022 Baller Share Posted August 9, 2022 *da da da da da da da da deathstar!* They're not a bad boat really if you aren't on a ski lake. Its not like they take off in random directions. If you've driven a few of these boats they are all a bit different. I don't think you can find a completely original unmodified early 1998 hull. MC added so many tweaks to these hulls that you have to look at the individual boats to see what MC added to your specific hull, they might have the fiberglass fillers in the spray pockets, they might have a winged rudder. Having driven quite a few boats that don't turn well even the worst of these boats turns better than a pontoon boat. Link to comment Share on other sites More sharing options...
Gold Member wski1831 Posted August 9, 2022 Gold Member Share Posted August 9, 2022 I have several friends with 2000 mastercrafts. They all have the wing rudder and “sponson kit” on them and all ski and drive well. If you want zero off you will need a new motor. It’s hard to say if it’s worth it or not, given the current price of boats. Link to comment Share on other sites More sharing options...
Baller ReallyGottaSki Posted August 9, 2022 Baller Share Posted August 9, 2022 perhaps we havn't confirmed if Cameron would find the PP w/ zbox adequate for his needs, maybe he doesn't know that exists? Or truly looking for zo as-written Link to comment Share on other sites More sharing options...
Baller_ swbca Posted August 9, 2022 Baller_ Share Posted August 9, 2022 I have a friend invited to the Sr world tounament and is a Ski Paradise coach He has updated PP . His ski Partner has ZO. They use both boats in Practice and use settings where they can't tell the difference between boats. They are both light skiers if that makes a difference. Link to comment Share on other sites More sharing options...
Baller_ Jody_Seal Posted August 10, 2022 Baller_ Share Posted August 10, 2022 not so fast in the new motor stuff.. if the engine in the boat is a vortec 350 it can be converted. it will take a new induction system but still cheaper then a $15k repower. Link to comment Share on other sites More sharing options...
Baller Lieutenant Dan Posted August 10, 2022 Baller Share Posted August 10, 2022 @Jody_Seal Like how much cheaper? Link to comment Share on other sites More sharing options...
Baller Deanoski Posted August 10, 2022 Baller Share Posted August 10, 2022 99sn Xbox skis great other boat us 2019 mc Same setting same score Link to comment Share on other sites More sharing options...
Baller man0seven Posted August 13, 2022 Baller Share Posted August 13, 2022 Have you looked into using Ridesteady by hydrophase? Solid product. Heck of a lot cheaper than a repower. Link to comment Share on other sites More sharing options...
Baller braindamage Posted August 13, 2022 Baller Share Posted August 13, 2022 +1 on Zbox. A lot cheaper and you can dial it in to be as good as ZO. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now