EmacSki4 Posted June 12, 2019 Share Posted June 12, 2019 im graduating soon and my parents were planning on getting me a new ski as a grad gift because my current one is beaten up and older. But long story short i bought some GOODE powershells for the new ski but they decided to get me a nice watch instead :(. not mad that i didn't get a ski and i'm very thankful but i have a problem now The ski im currently using has way too many screw holes and it's not a flat surface. I Don't like the idea of having the interlock tape on top of the holes it's pretty sketchy. What should i do about this, any advice helps !! Link to comment Share on other sites More sharing options...
Baller mmosley899 Posted June 12, 2019 Baller Share Posted June 12, 2019 @EmacSki4 you can easily mount those boots on the MOB release system and never need interlock tape again. Then you can also mount the system on any standard screw insert pattern without buying more tape. Mike's Overall Binding USA Water Ski Senior Judge Senior Driver Senior Tech Controller Link to comment Share on other sites More sharing options...
Baller skiboyny Posted June 13, 2019 Baller Share Posted June 13, 2019 Razor blade the tops of the screw holes flat and fill with epoxy. Link to comment Share on other sites More sharing options...
Baller BraceMaker Posted June 13, 2019 Baller Share Posted June 13, 2019 Jb weld the holes. Use a 45 degree counter sink in a drill to ream flush. Re apply jb weld and press flat under saran wrap. Link to comment Share on other sites More sharing options...
Baller klindy Posted June 13, 2019 Baller Share Posted June 13, 2019 Try Ski-It-Again and take some graduation money to upgrade the ski. Link to comment Share on other sites More sharing options...
Administrators Horton Posted June 13, 2019 Administrators Share Posted June 13, 2019 @EmacSki4 if you're worried about putting the tape over the top of raised inserts it's not a problem. Just use an exacto or razor blade to cut out the tape going over the inserts and you're fine. Or are you saying that you have a really old ski that doesn't have inserts and you have holes drilled directly into the ski? Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
EmacSki4 Posted June 13, 2019 Author Share Posted June 13, 2019 yes it has inserts, i'm going to take the advice and fill them with epoxy and just flaten it out as best i can. thanks for the responses :smile: Link to comment Share on other sites More sharing options...
Baller skialex Posted June 13, 2019 Baller Share Posted June 13, 2019 Unless you’re on a VTX or similar like an Omni, you won’t have an issue Link to comment Share on other sites More sharing options...
Baller BCM Posted June 13, 2019 Baller Share Posted June 13, 2019 I ran interlock over the inserts for many years without filling them. Keep in mind once you fill them you can't un-fill them. I was on Powershells for nearly 12 years. I would make sure they are flush with the top of the ski and if they aren't, either file/cut them down to flush or tape around them, but I would not mess with filling them. Link to comment Share on other sites More sharing options...
Baller Chef23 Posted June 13, 2019 Baller Share Posted June 13, 2019 @EmacSki4 the advice that @Horton provided for cutting out around the holes I think is better than filling them. Filling them with epoxy is unreversable. I ran a binding over inserts without any issue. Link to comment Share on other sites More sharing options...
Baller BraceMaker Posted June 13, 2019 Baller Share Posted June 13, 2019 I was visualizing a Goode that someone had drilled. Inserts to me aren't holes. Having just filled my old RTP holes on my D3 that was the process I used to get the top sheet nice a flush. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now