Jump to content

Help with Single Puck ZO Install


skinut
 Share

Recommended Posts

I'm upgrading my 2012 SN 200 to a single puck with rev. S. When I received the puck and wiring harness there were no instructions. Anyone have a good source for how to install and/or can give me some instructions from your install experience? Thanks in advance.
Link to comment
Share on other sites

  • Baller

Upon exposing the existing ZO harness beneath the dash, the ECI puck harness plug-in replacement is self-evident.

 

Re-flashing the ECM with the new binary information in ASCII hexidecimal text form contained in the Motorola S-record file format (.mot file download purchased from EControls) requires an ECOM cable and a bit of acumen if doing so without experienced help.

 

Link

Zero Off ECI GPS Antenna Puck Upgrade

Link to comment
Share on other sites

@Gloersen I’ve got the ecm update procedure. I’m just not sure which harness plug goes into which existing plug, ie there are currently two pucks with two plugs, once those are disconnected I’m not sure how the new harness mates up with the existing plugs. When I disconnects the old pucks does the new single puck harness plug into all the old existing plugs? If it only goes into part of the plugs, which ones does it go into?
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...