Baller Mazda Posted May 11, 2019 Baller Share Posted May 11, 2019 I have a 2014 5.7L Prostar with a 4 blade propeller. From day one I loved everything about the boat, except the deep water starts on a slalom ski. Getting up was slower and harder than on other boats. Is this a common issue with all Prostars or just my model? Is there a way to solve this problem? Link to comment Share on other sites More sharing options...
Baller ScottScott Posted May 11, 2019 Baller Share Posted May 11, 2019 I can't speak to the potential of the transmission issues of the early models etc potentially contributing.....but I can't imagine needing a full throttle start up on pretty much any ski boat. There have been a few threads here about deep water starts with many tips/technique suggestions, the latest thread currently not too far down the list "Deep water start new ski." Maybe worth looking those over and evaluating your technique. If its too slow....is your driver giving full throttle.....do they need to give you a touch more? Or is it technique. A full throttle start on any ski boat is going to rip the handle out of my hand. Unless there is some type of surge in the throttle there shouldn't be anything about the boat causing start up trouble. Link to comment Share on other sites More sharing options...
Baller Kelvin Posted May 11, 2019 Baller Share Posted May 11, 2019 @ScottScott I'm just over 200 lbs and ocassionally I will get a pull up in a tournament that is slower that I really like. At the end of the lake, I'll ask for more. Sometimes, the response is "that's all its got". Yes, some of the 2014 MCs were boats in that category. Link to comment Share on other sites More sharing options...
Baller Jordan Posted May 11, 2019 Baller Share Posted May 11, 2019 I would see if mastercraft will help you out with a deal on a transmission swap. Link to comment Share on other sites More sharing options...
Baller swc5150 Posted May 11, 2019 Baller Share Posted May 11, 2019 yes you need the transmission swap to the 1.26:1. Sounds like you have the original 1.22. Link to comment Share on other sites More sharing options...
Baller Dacon62 Posted May 11, 2019 Baller Share Posted May 11, 2019 Before you go spending money check if engine is getting enough air. Remove all the cup holders on the engine box or raise the motor box up by placing a 2x4 under it. If it’s not air then likely the trans/prop. My 17 PS with 5.7 doesn’t need even half throttle for pull up of 190lb skiers. Link to comment Share on other sites More sharing options...
Baller ScottScott Posted May 12, 2019 Baller Share Posted May 12, 2019 Yeah, plug that blower back in.... Link to comment Share on other sites More sharing options...
Baller BraceMaker Posted May 13, 2019 Baller Share Posted May 13, 2019 @swc5150 I'd be real curious to discuss with @ojeric to see if maybe they have some props they didn't in 14. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now