Reflex Supershell 3.0

[gregy]

Try moving the boot back and forth some. Its going to react a little differently than softer boots. Not sure if yours has the hill strap. Mine had a hill strap and it was a little on the tight side, it was tightening to soon when flexing my ankles forward causing a torque effect that led to too much tip pressure. Once I let it out a hole my skiing got better right away.

[mmosley899]

@owennibley @lpskier one of the big advantages of the MOB system is that you can use your same boot or one that fits your style. It is often the boot that is so different and not the release system. However there is also a different feel to how each system attaches the boot to the ski. The MOB release will feel more like the Fogman or Powershell than the Reflex release.

 

And moving from a rubber boot to any hardshell will require patience and re-learning your balance on the ski. Adding that to changing your rear foot boot just complicates matters. I tried a rtp and various rear boot setups. Absolutely could not do the rtp. The Radar HRT worked well but I ended up using the half boot hardshell. All those were tried using the same front boot I was accustomed to using.

 

If you can run the course easier in the radar boot, it can be used on the MOB system. Same with the Fogman boot.

[owennibley]

I just couldn't deal with the rtp so I bought a HO xmax rear binding and have it really loose. I'm feeling much better and am running 34mph now. Maybe I'll try the hybrid boot from radar and see how that works out.

Also, the 3d printed parts are breaking after 3 months of use. Hopefully I can get some replacement parts that will last longer without spending more money....

 

 

[C5Quest]

The 3D printed parts from Reflex are total garbage. I smashed through about 3 or 4 heel cups and one front toe piece. It was frustrating as heck. Once they did the right thing and came out with the carbon pieces I’ve never had an issue. It should have been that way from the start. The carbon heel cup and toe are rock solid now. My only issue is price. The toe piece should not be that expensive.