Baller ski6 Posted March 22, 2019 Baller Share Posted March 22, 2019 Hey Ballers, Wondering if anyone has had experienced anything like this before? We are having a problem where the boat can’t do 58km/h(36mph) for the first few passes of a set. (The times are slow like 16.85 when the boat is meant to be doing 36mph). After 3rd pass, the boat usually comes right and the times are fine again. I initially thought it was zero off/puck related but even with the Zero-off, off, the boat is not performing correctly. On the weekend, we did some tests with the zero off, off and no skier. The first pass the boat wouldn’t go past 36mph with the speed control off. You can even feel, the boat is slow/sluggish on the pull off. The second pass the boat was surging however the speed eventually came right towards the end of the second pass with a normal maximum speed of about 65/66km/h. I have uploaded the videos to dropbox to help show this crazy scenario. - click here You will hear the boat surging. Today, the 1st pass, the boat would only go about 53km/h at full speed(32 mph) at first so the problem seems be getting worse. There is also a lot of white smoke. I have also tried running it with the engine box open. However soon as the boat is switched off, and starts again the same issues come back. Once the boat starts running again and after pass 3, everything is perfect and the boat runs perfectly. Very strange I know. We also always ensure the boat is up to temperature prior to running it. During the tests, the temperate as seen from the video is normal. Boat model: 2013 SN 200, 5.7 litre with 800 hours used only in Fresh Water To date we have tried as follows; • Replacing O2 Sensors • Drained and cleaned fuel tank • Changed all the fuel filters • Changed distributor cap and rotor • Changed spark plugs - Performed compression test. All was in order • New manifold(the one was cracked slightly - redone normal service items - oil, impeller and belt change I have also run the diacom. No error codes to date. Cam retard is at 15 degrees Thank you in advance Link to comment Share on other sites More sharing options...
Baller Andre Posted March 22, 2019 Baller Share Posted March 22, 2019 Fuel pressure is the first thing to check if boat is not performing good. My ski finish in 16.95 but my ass is out of tolerance! Link to comment Share on other sites More sharing options...
Baller_ DW Posted March 22, 2019 Baller_ Share Posted March 22, 2019 @ski6: white smoke from the exhaust tends to indicate water in the combustion chamber. I suggest a leak down test as a better indicator of engine health check. It has the symptoms of a head gasket issue, probably between the center cylinders as the most likely area. Water in the combustion chamber can/will burn off as the engine warms up resulting in poor start up performance but eventually clearing out and running okay. If that is it, it will continue to deteriorate as it seems you are experiencing. You might pop out the plugs and see if there is any water in the combustion chambers (you could simply blow them out and see if water comes out the hole). If the engine seems to have a hard time turning over by all means stop, that is a signal you may be hydrolocking and could end up bending a con rod. Also, do you still have the old plugs, do a good inspection and google 'spark plug check' and compare yours to the pictures from the web. Link to comment Share on other sites More sharing options...
Baller skiinxs Posted March 22, 2019 Baller Share Posted March 22, 2019 Agree with Andre, check the fuel pressure at the fuel rail both when you are experiencing the problem and when it is running fine. I would bet you a slalom set that the pressure is down when you are experiencing the problem. You should be getting around 60PSI. If you don't have a pressure gauge you should be able to borrow one for free from autozone. If you want to record a diacom file while it is running bad and send the file to me I would be happy to look at it for you. Link to comment Share on other sites More sharing options...
Baller Kelvin Posted March 22, 2019 Baller Share Posted March 22, 2019 First thing to try is change the fuel filters. There is one in the line and another in the fuel control cell. When these are clogged, the boat can't get enough fuel. Link to comment Share on other sites More sharing options...
Baller jayski Posted March 22, 2019 Baller Share Posted March 22, 2019 just buy new one... :D Link to comment Share on other sites More sharing options...
Baller Andre Posted March 22, 2019 Baller Share Posted March 22, 2019 @Kelvin Fuel filters have been changed... My ski finish in 16.95 but my ass is out of tolerance! Link to comment Share on other sites More sharing options...
Baller_ Jody_Seal Posted March 23, 2019 Baller_ Share Posted March 23, 2019 "Lot of white smoke" 5.7 vortec engines common water leak around intake manifold water passages. Also as another suggested head gasket. Leak down test will identify a head gasket issue. Link to comment Share on other sites More sharing options...
Baller skihacker Posted March 23, 2019 Baller Share Posted March 23, 2019 Is the engine oil milky?? Leaking intake water passage gaskets will usually dump water down the lifter galley into the pan, that will wreck the bottom end in a big hurry. White smoke does point towards head gaskets unfortunately. Link to comment Share on other sites More sharing options...
Baller ski6 Posted March 23, 2019 Author Baller Share Posted March 23, 2019 So today, I put my used set of spark plugs back and the boat ran perfectly fine from the start. However I did get this error message while idling Link to comment Share on other sites More sharing options...
Baller skihacker Posted March 23, 2019 Baller Share Posted March 23, 2019 How many hours are on this boat? Pull the #4 plug and see if it's soaked with water, or fuel. Link to comment Share on other sites More sharing options...
Baller LeonL Posted March 23, 2019 Baller Share Posted March 23, 2019 No moisture in cylinders or on plugs when you changed ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now