Baller bassfooter Posted November 16, 2018 Baller Share Posted November 16, 2018 Found this on the floor of my ‘98 Ski Nautique, behind the driver’s seat. It appears to have sheared on the threaded end opposite the slot. The brass ‘roller’ slides off. Nothing unusual happened prior to finding it and everything was operating normally. Any ideas? Link to comment Share on other sites More sharing options...
Baller oldjeep Posted November 16, 2018 Baller Share Posted November 16, 2018 Look like parts for 2 different things. The brass piece is the sleeve for a compression fitting. Link to comment Share on other sites More sharing options...
Administrators Horton Posted November 16, 2018 Administrators Share Posted November 16, 2018 I know I've seen it somewhere... Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes Drop a dime in the can Link to comment Share on other sites More sharing options...
Baller Killer Posted November 16, 2018 Baller Share Posted November 16, 2018 Part of the throttle cable linkage perhaps? Link to comment Share on other sites More sharing options...
Baller BraceMaker Posted November 16, 2018 Baller Share Posted November 16, 2018 Seat track feel normal? Link to comment Share on other sites More sharing options...
Baller_ Jody_Seal Posted November 16, 2018 Baller_ Share Posted November 16, 2018 Teleflex cam style control. After mv series. 96-2013 correct craft and others. The parts we are looking at are what rides in the throttle control and actuated the throttle cable. Post and brass bushing . Rides inside cam slot. Pay the man! Link to comment Share on other sites More sharing options...
Baller eleeski Posted November 16, 2018 Baller Share Posted November 16, 2018 That explains the high idle RPM. That will teach you to pull trickers (thanks again). Eric Link to comment Share on other sites More sharing options...
Baller bassfooter Posted November 16, 2018 Author Baller Share Posted November 16, 2018 @Jody_Seal thanks! Replaceable or whole new unit. I owe you! Link to comment Share on other sites More sharing options...
Baller bassfooter Posted November 17, 2018 Author Baller Share Posted November 17, 2018 @killer - thanks - you were right on it. @eleeski you’re more than welcome. Always a great time. I love this site. Link to comment Share on other sites More sharing options...
Baller Orlando76 Posted November 17, 2018 Baller Share Posted November 17, 2018 It clearly looks like a tape measure. Link to comment Share on other sites More sharing options...
Baller bassfooter Posted November 17, 2018 Author Baller Share Posted November 17, 2018 @Orlando76 - you rule! Link to comment Share on other sites More sharing options...
Baller_ Jody_Seal Posted November 17, 2018 Baller_ Share Posted November 17, 2018 @bassfooter Never been able to find those parts as replacement. Might as well bite the bullet and replace whole unit. Discount inboard marine has em. Link to comment Share on other sites More sharing options...
Baller bassfooter Posted November 18, 2018 Author Baller Share Posted November 18, 2018 @Jody_Seal thank you very much for pointing me in the right direction. Turns out the part simply unthreaded itself - it wasn’t sheared. I pulled the assembly out of the boat, cleaned and lubed everything, and screwed that part in with a drop of Locktite. We’re back on the water with a throttle that’s smoother than before, and I learned how that throttle/shifter works - very cool. Teleflex made the right move by replacing the spring-loaded dwell mechanism with this cam-driven version, don’t you think? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now