Baller lff Posted September 19, 2015 Baller Share Posted September 19, 2015 @Razorskier1 -any chance you could post some vid of the wake at speed? Link to comment Share on other sites More sharing options...
Baller 6balls Posted September 19, 2015 Baller Share Posted September 19, 2015 Hello @Iff interesting thought there, He opens at 28 and runs 38 and tells me there is no perceptible difference in wake. Might be interesting to see the look, but I'd be more interested in the feel from a skier who ran it before and after in terms of wake. I have not been over there since the install...would be curious to hear it (or not hear it in this case). May not be in the cards yet this fall. Video seemed very quiet. Link to comment Share on other sites More sharing options...
Baller Razorskier1 Posted September 21, 2015 Author Baller Share Posted September 21, 2015 @lff - will see if I get a chance in the next few weeks. Wind isn't favorable for my lake right now, and I'm leaving Thursday for a 5 day ski trip down south. I can say that you can see that there is more air in the center of the wake. In other words, there is a path about 2-3 feet wide in the center that is white now vs. being more water colored before. The table also seems flatter. However, I think that could be a treacherous area for barefooting, as the extra air might make the water too soft in the center. Haven't tested that theory yet. Probably will not happen until next year. Link to comment Share on other sites More sharing options...
Baller RazorRoss3 Posted September 21, 2015 Baller Share Posted September 21, 2015 Can't speak for -15 or for 34mph, At 36 and -22 through -35 there is no perceivable difference in the wake. It is still super soft. One point as the guy who drives 34 mph skiers is that the tracking changed a little bit from having the exhaust pipe there. Doesn't make it bad, just different and it takes a set to get it dialed as the driver. Link to comment Share on other sites More sharing options...
Baller whitecaps Posted June 4, 2019 Baller Share Posted June 4, 2019 Anyone using the Fresh Air Exhaust on their slalom tugs? I'm always looking for ways to get things a little more quiet. Link to comment Share on other sites More sharing options...
Baller whitecaps Posted June 4, 2019 Baller Share Posted June 4, 2019 I remember reading this thread from several years ago but haven't heard much lately about anyone using a FAE. Link to comment Share on other sites More sharing options...
Baller kpickett Posted June 4, 2019 Baller Share Posted June 4, 2019 @whitecaps I put it on my Response last spring, so I've gone through a full season with FAE. I put it on for few reasons - my wife and kids are especially sensitive to exhaust smell. They always complain about it, even though the Response exhaust has cats. Also, even though the boat is mostly used for slalom, we do occasionally drop the wedge and surf. Plus, anything that makes the boat quieter is a bit plus for me. I am 100% happy with it. I have noticed no change to the slalom wake. I ski between 22 and 35 off at 34. My wife skis 15 off at 30 mph. The kids have been working their way up the slower speeds. The exhaust is MUCH quieter, and the exhaust smell is pretty much gone. It takes a little getting used to having the pipe back there. The spray feels a little wonky at first, but it just deflects off the platform, and doesn't really affect anything. I haven't noticed any drop in speed, but I never run the boat at wide open throttle. I installed it myself, and it was significantly more difficult than they make it sound, but that's mostly because of the wedge on the Malibu. Let me know if you have other questions. Kyle Link to comment Share on other sites More sharing options...
Baller vernonreeve Posted June 4, 2019 Baller Share Posted June 4, 2019 We put it on our 99 Malibu Response lx a few years ago, and had no problems. Huge improvement in reduced sound. The people in the back seat can actually talk to each other now during our family outings, and don't have the exhaust smell while idling. Link to comment Share on other sites More sharing options...
Baller skibrain Posted June 4, 2019 Baller Share Posted June 4, 2019 I helped install on my regular ski buddy’s boat 4 yrs ago. 2004 Malibu LXi 340 Monsoon. These are loud boats - mostly from the back as you hear them bark all the way down the lake. No difference that we see in ski wake. Does it reduce top speed 1 mph? Who cares. The only adjustment is that there is a pretty big rooster tail spray in a sharp turn (-32/35 off) if we spin at end of lake. (Only sprays as boat pivots and back end is sort of sliding sideways). Just move over 4-5’ to just outside wake and it’s no prob. We ski early on a public metro lake with residences on about 1/2 the shoreline, so being respectful is super important to us. I forget about how much improvement it is until a guy on the lake with exact same boat (stock exhaust) is in the rotation. I’m a HUGE fan. I’d like to help my neighbor down the block install underwater exhaust on his Harley..... (We removed the wedge. Had never used it) Link to comment Share on other sites More sharing options...
Baller skimtb Posted June 4, 2019 Baller Share Posted June 4, 2019 @Razorskier1 Does your platform still fold down with this on? Any pics? Link to comment Share on other sites More sharing options...
Baller BraceMaker Posted June 4, 2019 Baller Share Posted June 4, 2019 @whitecaps I'm a big fan - its been on my "next year" list for several years after being in a boat with one. Beyond just skiing we have a ~30-45 minute dead idle no wake river we often run and quieter is better for everything you can possibly think to do for 45 minutes at an idle. Link to comment Share on other sites More sharing options...
Baller Keith_Menard Posted June 4, 2019 Baller Share Posted June 4, 2019 Someone needs to do a straightpipe for comparison :) Link to comment Share on other sites More sharing options...
Baller m_pags Posted June 4, 2019 Baller Share Posted June 4, 2019 I put FAE (Y-Version) on my 17' 5.7 PS. It's much quieter from outside the boat but not a big change from inside the boat. I also think it uses a slight amount more fuel with the FAE. As for wake I can't tell any difference except for the small spray right behind the platform. @skimtb I can't fold the platform down without removing it. Link to comment Share on other sites More sharing options...
Baller skimtb Posted June 4, 2019 Baller Share Posted June 4, 2019 @m_pags Thanks for sharing. Did you get the quick disconnect kit or std mount? Platform goes down for winter and I wouldn’t want it to be big ordeal and or strip out holes in platform. Link to comment Share on other sites More sharing options...
Baller m_pags Posted June 5, 2019 Baller Share Posted June 5, 2019 @skimtb I have the quick disconnect. Remove 2 pins & loosen 4 hose clamps and it's off. Link to comment Share on other sites More sharing options...
Baller whitecaps Posted June 5, 2019 Baller Share Posted June 5, 2019 Anyone put one on a bubble back ? TSC1? 98 ski nautique? or whatever name you might want to put on it. Link to comment Share on other sites More sharing options...
Baller vernonreeve Posted June 5, 2019 Baller Share Posted June 5, 2019 Mine has the quick disconnect also. Remove 2 pins from where it connects to the ski platform, but don't have to loosen the hose clamps. Our platform lifts up to come completely off however, it doesn't hinge down. Link to comment Share on other sites More sharing options...
Baller skibrain Posted June 5, 2019 Baller Share Posted June 5, 2019 LXi hanger attaches to platform brackets. Not Quite as pretty as the Y pipe — don’t know if that was an option when my buddy ordered. Link to comment Share on other sites More sharing options...
Baller colo_skier Posted June 17, 2019 Baller Share Posted June 17, 2019 I had an FAE on my 2007 LXI with a hammerhead engine. As stated by everyone the boat is so quite you can hear the wake. The hole shot was the issue for me. The start up power seemed to be reduced significantly. We are at altitude here so maybe the exhaust restriction put the Hammerhead over the edge. Or maybe the FAE doesn't work well with the tuned headers. I don't wake surf enough to use it so I have it removed. Hole shot is good again. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now