Radar Sequence Plate fixed screws placement

[Dacon62]

How are you guys setting up the sequence plate?

Fixed screws in the middle, front or?

On a green Vapor with dual plates now.

Didn't know any better (until I read about it here) and the store that sold me the sequence plate sold it to me with all fixed screws, no inserts so plate could move and ski could flex properly. Needless to say the ski did not turn well till I went back to dual plates.

Want to know how to set it up with the sequence plate and see if I can milk a little more performance out of it.

[Mateo_Vargas]

Fixed in the middle and sliders on the ends is how it was designed.

[SkiJay]

@Dacon62

If you let the front of the Sequence float on a 2014 or 2015 Vapor, it increases the already significant tip-sensitivity. So on the Vapor, I like to bolt down the middle and front, but use the floating inserts in the back of the plate. Vapors also like dual plates.

[wtrskior]

I use front and Middle fixed on every ski. For years I used front float but got sick of the sound the plate made and concerned me for safety even though I never had an issue. I never found it made a noticable difference float or not.