Administrators Horton Posted November 12, 2014 Administrators Share Posted November 12, 2014 When I got my new blue Vapor I tried both Rini and Rossi settings. Both worked but were not the feeling I was looking for. I went back to my settings from when I reviewed a green ski. After about 5 sets I am pretty darn stoked. Slot .777 Head .775 6.8565 (tips) 2.478 8° 29 15/16 Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Baller ForrestGump Posted November 12, 2014 Baller Share Posted November 12, 2014 I'm assuming a 67? Link to comment Share on other sites More sharing options...
Administrators Horton Posted November 12, 2014 Author Administrators Share Posted November 12, 2014 @ShaneH yep. Sorry.I forget there are other sizes Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Baller_ RichardDoane Posted November 12, 2014 Baller_ Share Posted November 12, 2014 @horton - how much do I change the DFT to compensate for the lack of hair ? Link to comment Share on other sites More sharing options...
Administrators Horton Posted November 12, 2014 Author Administrators Share Posted November 12, 2014 @richarddoane I don't know but after riding your ski I think you need to grow out your hair or change your settings. Something is wrong and it is not the ski. Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Baller_ RichardDoane Posted November 12, 2014 Baller_ Share Posted November 12, 2014 @horton - i actually reset to Rini's numbers and it seemed better, but will try yours on the next ski ride. did you ever consider that MAYBE my fin had been adjusted just for your ski ride ? Link to comment Share on other sites More sharing options...
Moggie Posted November 12, 2014 Share Posted November 12, 2014 @Horton - When you measure your front binding position where do you measure it from on the boot? Link to comment Share on other sites More sharing options...
Administrators Horton Posted November 12, 2014 Author Administrators Share Posted November 12, 2014 Top stitch on back of Vapor boot. Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Administrators Horton Posted November 12, 2014 Author Administrators Share Posted November 12, 2014 Crap. Maybe bottom stitch. There is a mark on my plate so I forget. @eddie_roberts_jr this is where you tell everyone I am a knuckle head Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Baller Deanoski Posted November 12, 2014 Baller Share Posted November 12, 2014 Horton what is your back distance from tail? Link to comment Share on other sites More sharing options...
Baller_ RichardDoane Posted November 12, 2014 Baller_ Share Posted November 12, 2014 @deanoski - you're feet should be as close together as possible, so the rear foot distance is a function of what boot size you're using Link to comment Share on other sites More sharing options...
Baller Jordan Posted November 12, 2014 Baller Share Posted November 12, 2014 @Horton maybe as a learning exercise for us in the non-fin-guru class could you tell us what you were looking to change when you altered your settings and perhaps what each change away from the recommended settings did for you? It might be interesting!!!! Link to comment Share on other sites More sharing options...
Baller bigtex2011 Posted November 12, 2014 Baller Share Posted November 12, 2014 Hey @horton it's interesting. What's your water temp. before i broke my ankle in june i was running 2.472, .745. 6.880 29 7/8 i was rico ing alot and getting thru 38 quite a bit in practice. i went to 1 tourney got 4 and was bummed. broke ankle day after. went i cranked back up in sept i settled in on 2.472, 6.869. 742 and 29 13/16. got back to scrapping out a few 38's before the water and weather took a dive. i got my vapor in nov of 2013. i tried a ton of settings. but never that far forward. looking forward to this Michigan/artic air to leave the lone star state. we need rain too if you are looking for a reason to dance Link to comment Share on other sites More sharing options...
Administrators Horton Posted November 12, 2014 Author Administrators Share Posted November 12, 2014 I find most modern skis to be finicky to set up for 38 and beyond. Factory numbers and help from factory team guys is key. I always start with factory settings. How did I get to these settings? It was 18 months ago and I honestly do not recall all of the iterations. I know Matt and or Chris helped me. I did find the settings in warm / hot water. They still work for me today and my water is 65ish. As a rule I do not adjust much as the water temp changes. I figure that when the water gets cold I change more than the anything plus just don’t want to chase it. When I get a ski where I want it I generally leave it alone and work on my skiing. What I was looking for? I want the ski to arc in early and then flow back smoothly to the center at off side. A large percent of my settings efforts center around my one ball exit. I am RFF so that is off side. On side on the Vapor is basically foolproof. It is not 100% accurate to say that I did not like the stock Rossi or Rini settings on my new Blue Vapor. When I tried both settings I still had the stiffeners in my new Vapor boots. I strongly suspect that I ski better with a softer boot. I took out the stiffeners the same day as I went to my old settings. There is ZERO scientific method here. All I can say for sure is that I am smoking 35s and using self-control to keep from trying to run 38 at the moment. Skiing darn good for November. Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Baller Jordan Posted November 12, 2014 Baller Share Posted November 12, 2014 @Horton...by stiffeners, do you mean the plastic parts inside the vapor boot? Link to comment Share on other sites More sharing options...
Baller wtrskior Posted November 12, 2014 Baller Share Posted November 12, 2014 @richarddoane it stands to reason that the smaller your feet the more you can separate them. The wider your stance the more stable you can become to a certain point. I've had a couple pros suggest I go 1 back in the rear to just that and it cured offside stalling completely. I'm a size 9 on 67. @5'10" Link to comment Share on other sites More sharing options...
Administrators Horton Posted November 12, 2014 Author Administrators Share Posted November 12, 2014 @Jordan yes Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Baller JC McCavit Posted November 12, 2014 Baller Share Posted November 12, 2014 @Horton - Stiffeners in new Vapor boots? Is this a new feature for 2015? Link to comment Share on other sites More sharing options...
Administrators Horton Posted November 12, 2014 Author Administrators Share Posted November 12, 2014 @JC McCavit yes Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Baller bigtex2011 Posted November 12, 2014 Baller Share Posted November 12, 2014 Oddly enough I am RFF as well. My offside is money. For the most part, always has been. Some skis better than others. My onside is a bit mechanical. On the Vapor, the onside is descent to pretty good, offside again is sick. I usually don't do much for cold water changes either, my move might have been due to me coming back from the ankle break. I probably was getting stronger and pressing to get big scores for me before winter arrived. Can't wait to get back out there. It's 36 degrees in Dallas today so it might be awhile. bummer dude Link to comment Share on other sites More sharing options...
Baller JC McCavit Posted November 12, 2014 Baller Share Posted November 12, 2014 @Horton - I can't find anything about the stiffeners in brochure or on the Radar website. Are they removable? Can you post a picture? Link to comment Share on other sites More sharing options...
Administrators Horton Posted November 12, 2014 Author Administrators Share Posted November 12, 2014 @JC McCavit someone will. My stuff is at the lake house Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Baller Jordan Posted November 12, 2014 Baller Share Posted November 12, 2014 http://www.perfski.com/files/3b/b095da93-5056-8800-7893-b4c7455b573b.jpg Link to comment Share on other sites More sharing options...
Baller ToddL Posted November 12, 2014 Baller Share Posted November 12, 2014 Hmmm... So the prior models had plastic "stiffeners" built into the shells. Do the blue shells no longer have any plastic along each side of the ankles anymore? Link to comment Share on other sites More sharing options...
Administrators Horton Posted November 12, 2014 Author Administrators Share Posted November 12, 2014 @ToddL not much of anything else is changed. The stiffeners are added to the previous design Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Baller SkiJay Posted November 12, 2014 Baller Share Posted November 12, 2014 @Moggie Measure from the bottom stitch on Strada/Vapors. Link to comment Share on other sites More sharing options...
Baller JC McCavit Posted November 12, 2014 Baller Share Posted November 12, 2014 @Jordan - thanks, not sure how I missed that image in the brochure. Link to comment Share on other sites More sharing options...
Baller DanE Posted August 3, 2015 Baller Share Posted August 3, 2015 Have anyone noticed 2015 Rossi and Rini settings are very similar? Wasn't it a big difference between them last year with Rini settings being shallow and long? Link to comment Share on other sites More sharing options...
Administrators Horton Posted August 3, 2015 Author Administrators Share Posted August 3, 2015 Things change Goode ★ HO Syndicate ★ KD Skis ★ MasterCraft ★ PerfSki Radar ★ Reflex ★ S Lines ★ Stokes ★ Baller Video Coaching System Become a Supporting Member or make a One-time Donation Link to comment Share on other sites More sharing options...
Baller DanE Posted August 3, 2015 Baller Share Posted August 3, 2015 So you could say there is more of a consensus between the 2 now? Anyone tried both? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now