Baller ISP6ball Posted August 12, 2014 Baller Share Posted August 12, 2014 My fin has moved a couple times in the last 4 months. I'm not exactly sure how it's happening because it's in a padded bag all the time, unless it's in the boat. The first time I thought it might have bounced in the boat from hitting waves, so I made sure I laid the ski on its side from that point on. It seemed to move after doing that about a month later. Unfortunately, that's an aside to my question. I took off my fin fin block last night to make sure everything was clean and nothing was interfering with the screws securing the fin to the fin block. When I took it all off, I noticed some pitting or little chips on the underside of the ski by the fin slot. Is this something to be concerned about? I looked at my A1 and Monza and they don't have that happening to them. Any thoughts are appreciated thanks A Link to comment Share on other sites More sharing options...
Baller Waternut Posted August 13, 2014 Baller Share Posted August 13, 2014 It's worth sending the pictures to HO and see if they'll do anything for you. I don't really consider it a big deal and would probably just sand the sharp edges down by hand. However, I'd probably be a little upset if I bought the ski new within the last year. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now