Nano One Relex back Boot Placement

[skinut]

I am mounting my Reflex setup to the nano 1, white cuff front boot and R style rear boot. I discovered that the Reflex rear boot carbon plate, with the gazillion mounting holes in it, does not fit the rear hole pattern of the N1. Any suggestions on mounting it? After looking at the mounting plate the only way I see to mount it is to drill new holes in it. I don't want to use interloc for fear of the binding coming off and sinking to the bottom of the lake. What a PIA. What rear boot has the right pattern to fit on an N1?

[ForrestGump]

None really have the right pattern. Drill the holes in the plate.

[skialex]

None has the right pattern, drill new holes to the front and widen the rear slots. You can also slotted the front new holes and use the microjust.

Good luck!

[PatRe]

Perhaps the Reflex mono (single long plate) will provide the solution.

[Chuck_Dickey]

I have the R style rear and the holes line up fine on my Nano One 65.25". No extra holes needed. I have my rear heel at 17.5", front at 28.875" Small feet, size 8.5

[skinut]

Thanks, I just drilled the plate. Not a big deal I just thought it was odd that with all of the holes in the plate it didn't match the inserts on the ski.

[ral]

I really do not know why Goode cannot get the inserts in the correct place. Only company out there that can't...

[MattP]

They are new to the whole insert thing... 2 of my friends have Goodes with inserts in the wrong place...