Baller escmanaze Posted September 4, 2012 Baller Share Posted September 4, 2012 Hi Everybody, I need a little help while boat shopping. I was looking at a Response LX today and got to looking under it and saw that the middle fin kind of pokes out to the right. So here are my insanely naive questions. They're all supposed to be straight down right? Is this an expensive fix? Thanks for any input. I would also love to hear anything that any of you might say on other things I should look for. Scott Quote Link to comment Share on other sites More sharing options...
ntx Posted September 5, 2012 Share Posted September 5, 2012 Most likely got bent going on or off the trailer. About 100.00 installed +/- Quote Link to comment Share on other sites More sharing options...
Baller A_B Posted September 5, 2012 Baller Share Posted September 5, 2012 I have seen someone take a sledge hammer to one to get it in line. Not sure a dealer wouldn't do that once you left the parking lot.... I might use a block of wood against the skeg and hit the wood with the sledgehammer, just to be safe :) Quote Link to comment Share on other sites More sharing options...
Baller thager Posted September 5, 2012 Baller Share Posted September 5, 2012 If the boat tracks straight, who cares! Quote Link to comment Share on other sites More sharing options...
Baller escmanaze Posted September 5, 2012 Author Baller Share Posted September 5, 2012 Thanks tons guys. I really appreciate the input. I'll keep you updated on how it goes. Quote Link to comment Share on other sites More sharing options...
Baller Alberto Soares Posted September 5, 2012 Baller Share Posted September 5, 2012 I straighten mine using a 15lb piece of wood, it´s fine now. Quote Link to comment Share on other sites More sharing options...
.jpg.c814cbd040e12cb29f59fb62c5557165.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.