wacko Posted March 12, 2011 Share Posted March 12, 2011 Hey, Couple questions regarding the rs1 binding. 1. I have a size 7 foot. Can I get a size 8 (as that is the smallest) to work or in your opinion will it be to big? I guess I am asking do they fit true to size or maybe a little small? 2.When purchasing the rs1 binding does it come with a mounting plate or does it normally need to be purchased seperately? Thanks Link to comment Share on other sites More sharing options...
Agustafson Posted March 12, 2011 Share Posted March 12, 2011 From my personal experience my first year RS1 boots I went with 1 size larger than my shoe size which was a 10.. The liners are defiantly thicker on the RS1 (gold liners) than the Stradas (grey liners) I also used a thicker foot bed to help get added heel lift on both boots.. You will be fine with the size 8 RS1's! I'm currently running Stradas in a size 10 but could have probably gone with a 9 as they seem to be more true to size! Hope this helps you out. Also RS1's don't come with plates or the single plates but Stradas come with the individual plates but I would recommend the single mounting plate as this helps with adjustments and ski flex. Link to comment Share on other sites More sharing options...
wacko Posted March 13, 2011 Author Share Posted March 13, 2011 Thanks for the info. Much appreciated. What would you say the main advantages of the strada over the rs1? Link to comment Share on other sites More sharing options...
Bud Man Posted March 13, 2011 Share Posted March 13, 2011 Availability. I believe they quit making the RS-1 boots in 2009. I think 2010 ushered in the Strada boot. Â IMO, the RS-1s had a more firm shell and thicker lining. The Stradas seem to have a softer patch of rubber above the heel and thinner liners. Link to comment Share on other sites More sharing options...
Tuney Posted March 13, 2011 Share Posted March 13, 2011 I have an 8.5 wide foot and the size 9 RS1's fit me really well. My dad has a size 8 foot, he rides my boots as well and his opinion is that they work for him but he would probably go smaller. Link to comment Share on other sites More sharing options...
Baller Ed_Obermeier Posted March 13, 2011 Baller Share Posted March 13, 2011 So to make sure I'm clear on the sizing thing, if I order a new set of Strada boots this spring (which I'm strongly considering) and my foot is a 12 wide I would probably want to go with a size 13? I would like to put PowerStep or Superfeet insoles in them too so I'd think that would take up any slack. Suggestions? TIA, Ed Link to comment Share on other sites More sharing options...
Baller davemac Posted March 13, 2011 Baller Share Posted March 13, 2011 Hey EZ Ed, I believe the Stradas run truer to size, where the RS1s ran a bit on the small side. This is possibly due to the Strada having a thinner liner. I am an 8 wide, and the Strada 9 had too much slop for me. I have a powerstep in my 8. Adding arch support will usually "shorten" the length of your foot. Link to comment Share on other sites More sharing options...
Baller Ed_Obermeier Posted March 13, 2011 Baller Share Posted March 13, 2011 Thanks Dave, that is what I needed. Thinking of pulling the trigger before the season starts so if they don't work out I won't have too much season invested.I'm a little anxious coming off 5 - 6 years on D3 Leverages about how much adjustment it will be to the Stradas. Most seem to take right to them but I've known a couple of folks who didn't like the feel. Thoughts? Link to comment Share on other sites More sharing options...
Baller davemac Posted March 13, 2011 Baller Share Posted March 13, 2011 the toughest part of the transition from rubber is that you will feel compelled to crank the bungees tight....which you don't want to do..at least on the top one. I had to progressively loosen mine each time out. Good luck. There is plenty of tinkering you can do with them to get the right fit...between heat molding and experimenting w/ different insoles. Another Plus... you'll be doing your part to reduce our nation's dependency on that precious natural resource ... slime. Link to comment Share on other sites More sharing options...
wacko Posted March 13, 2011 Author Share Posted March 13, 2011 What is the expected life expectancy of the liners? I realize it will of course depend on how much you are skiing but a rough estimate? Link to comment Share on other sites More sharing options...
Baller MrJones Posted March 13, 2011 Baller Share Posted March 13, 2011 I hope Radar comes out with smaller sizes. Our kids are currently in rubber bindings, but as they progress I would prefer to put them in Strada's vs. any of the current hardshells out there. Link to comment Share on other sites More sharing options...
Baller thager Posted March 13, 2011 Baller Share Posted March 13, 2011 Wacko, I'm in my third year in my RS-1s with the original liners. I don't take the liners out except to make sure they're dry at the end of the year. Mine still show no damage and no mold or mildew. No other issues with the bindings. As far as injuries I suffered a thigh muscle pull that I caused when I tightened down the laces too much at a tournament. I ski 4-5 days per week. Link to comment Share on other sites More sharing options...
wacko Posted March 14, 2011 Author Share Posted March 14, 2011 Thanks thager. Thats sounds pretty good. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now